Archive for the ‘IMAQ’ Tag

Creat Region of Interest mask in IMAQ image

Wednesday, May 2nd, 2012

I have been working on using a USB webcam as a research tool to observe the heart beat of a Daphina (water flea) these days. Since LabVIEW 2009 IMAQdx is available for 3rd party USB cameras, no extra USB driver is required. So I used the old but classic webcam Philips SPC 900NC to build a Daphnia observation system. I may talk more about this later.

To cut a long story short, I tried to process only the Region of Interest (ROI) of the grabbed image rather than the whole one. This can make the analysis easier. Since this USB webcam does not support ROI imaging, we cannot set XY pixels on it.   I tried to google the solution and found creating a mask or, a pseudo ROI, can block the unwanted image. I programmed an example for blocking the unwanted image by selecting ROI on the image:

For some unknown reason I cannot create snippet from this VI, so I save the screenshot instead.
In this example three memories were created to store the original image, the mask and the modified image. If an ROI is selected (FALSE case), firstly convert the ROI info to a mask, and then mask the source image with the mask image. If no ROI is selected (TRUE case), the destination image is linked to the source image.

Note that:1. The property node “ROI” is created by right clicking the “image” indicator in the block diagram and selecting “Create>Property Node>ROI”.
2. The image type of the “Mask” must be Grayscale U8. The original and the changed images can be any image type.
3. It is masking the image rather than ROI imaging. So it will NOT increase the frame rate nor decrease the image size. All black regions are filled with 255 by default.

Hope this example can be helpful. Let me know if you have any problem or are interested in controlling conventional USB webcams with LabVIEW IMAQdx.

7 sins of IMAQ module

Monday, January 10th, 2011

I have been using IMAQ module in LabVIEW these days, and the integration of many algorithms saved me a lot of time. It is the core module when we want to do Machine Vision. I haven’t digged into it since the subset seems OK for my job. But in this post I’m not saying the beauty of it, instead, I’m going to tell seven sins of the IMAQ module. Just to clarify, I splitted some up in order to make it “7”. All the problems are based on vision development module 2009.

1. It has to be in IMAQ. Sometime I just want a simple “2D array filter” to proceed my 2D data, but there is no such a node in the core functions, although I though it’s not complex. And the fact is, if I want to proceed my raw 2D array in any ‘image’ way, I have to buy and call IMAQ module to do that, plus conversion back and forth. That’s not handy.

2.  Non-standard connector layout. Here is the connector  layout:

It’s not using standard 4224 layout pattern, and the wiring becomes a chaos in this case.

3. Old style front panel. Here is the front panel comparison of the “IMAQ create.vi” and “Open/Create/Replace file.vi”

As you can see, the controls and indicators are different in two VIs. So if we have IMAQ VIs with other VIs in the same top level, we will have diffrent front panel controls if we just create controls by right clicking.

4.IMAQ VIs should support all image types which makes sense” as described in the NI idea exchange.

5. Along with the last sin, there is no boolean array input/ output in “IMAQ ArrayToImage.vi” and “IMAQ ImageToArray.vi”. Actually boolean 2D array is quite useful in many pattern recognization applications. (Yeah, this is the extra sin I just divided from last one)

6. “Image Dsc Out” missing in some VIs. E.g, after the proceeding of the image and we want to convert it back to an array, do we need to release the buffer we created? If yes, there is no such a connector on the output. I assume all the VI without the “Image out” connector is to be used as indicators, but still, it’s better to keep it uniform.

7. We have to create buffer to manipulate images. In this module it’s not as smart as in Array functions, we need to create one buffer to proceed an image, mutiple buffers for mutiple ones (or, use one buffer one by one). It would be nicer if NI can make this easier.

Anyway, IMAQ is a very useful module and hope I’ll study ultilize it better in the future.